Halstead CLUB HE 18, Installation And Servicing Instructions

Page: 5 / 43

2.3 GENERAL SPECIFICATIONS
Appliance Club HE 18
Total weight (full) kg 44.1
T otal weight (empty) kg 42.0
Max lift weight kg 41.0
T otal water capacity Ltr 1.8
Integral expansion vessel capacity Ltr 8
Maximum heating system water content
using fitted expansion vessel, @ 0.75 bar
Ltr 84
Electrical supply 230V 50Hz
Inter nal fuse T4H 4A 250V
Maximum power consumption W 106
IP Rating IP20
Flue gas temperatur e Nat Gas 50/30
°
C 53
CO
2
value max rate (Nat Gas) (G20) %
9.2 ± 0.3 case on
9.0 ± 0.2 case off
CO
2
value min rate (Nat Gas) ref only (G20) % 8.6 ± 0.3
CO/CO
2
Ratio max rate (Nat Gas) (G20) % 0.0011 + 0.0014
Flue pr oducts mass flow rate (Nat Gas) (G20) g/s 14.7
Gas V alve Offset @ min rate Pa -5.0
Connections
Gas 15 mm compr ession
CH flow 22 mm compr ession
CH r eturn 22 mm compr ession
Pr essure relief valve outlet 15 mm compr ession
Condensate Drain 21.5 - 22 mm plastic over flow pipe
3
NOTE: THE ST ATED HEAT INPUT AND CO2 VALUES ARE NOMINAL AND MAY VARY BY ± 5-10% WHEN THE APPLIANCE IS
RUN WITH LINE GAS, DUE TO FLUCTUATIONS IN GAS QUALITY.