Getting Started with the HaloFogger® EXT
I
MPORTANT
Before using your HaloFogger, it is important that you:
1. Plug the HaloFogger EXT into a power source for 24 hours to fully charge the HaloLog’™
Data Logger’s internal back-up battery.
2. Download the HaloMist™ All-Purpose Disinfectant Use Instructions.
Go to
www.halosil.com
, register your new fogger purchase to download.
Setup Instructions
Locate the connector end of the power cord. Insert the connector into the power receptacle located at the
bottom of the rear panel of the HaloFoggerEXT. Ensure that the connector is securely in place. Plug the
HaloFogger EXT into a standard electrical outlet. The green status indicator light will illuminate.
Setup and Filling
THE HALOFOGGER EXT IS DESIGNED FOR USE WITH HALOMIST™ ALL-PURPOSE DISINFECTANT AND SHOULD
NOT BE OPERATED WITH ANY OTHER MANUFACTURERS DISINFECTING OR CLEANING PRODUCT.
Installing Nozzle Assembly on the HaloFogger EXT
Locate the Nozzle Assembly from the HaloFogger EXT shipping box and unwrap. The assembly includes
the high precision nozzle head, adjustable mounting arm, and extra long hose with quick connect hose
couplings. Locate the graphic icon on each quick connect coupling, match with corresponding icon and
bulkhead fitting on the top panel of the HaloFogger, and press firmly to engage connector until an audible
‘click’ is heard..
(Press button on coupling to disconnect.)
WARNING
Do not operate the HaloFogger EXT without the extended nozzle hose assembly fully connected.
Damage will occur.
Filling Instructions
1. Open the HaloFogger EXT Reservoir Door by lifting front edge of door.
2. Locate the disinfectant fluid level indicator lights to the left of the funnel. One flashing red light will be
illuminated indicating the HaloFogger EXT is empty.
3. Use personal protection equipment (PPE) including wrap-around style goggles and gloves when pouring
disinfectant fluid into the device.
4. Open a gallon (3.8 liters) bottle of HaloMist™ Disinfectant and SLOWLY pour the contents into the funnel
area. AVOID SPLASHING.
5. The fluid level indicator lights will illuminate as you pour to show how much disinfectant is in the device.
6. The HaloFogger EXT holds two gallons (7.6 liters) of disinfectant when full. Stop pouring when the top
green light on the fluid level indicator is illuminated. Do not overfill.
7. Wipe up any spills with a clean paper towel or rag. Thoroughly rinse off gloves and hands.
8. Close Reservoir Door.
9. The HaloFogger EXT is now ready to be used.
Basic Operating Instructions
1. Set the timer to the number of minutes specified for your room size. See Quick Instructions on
rear of unit.
2. Plug the HaloFogger EXT into a standard, grounded electrical wall outlet. When the power connection has
been made, the green status indicator light on top of the device will illuminate.
3. Check fluid level indicator lights. It is recommended the unit’s reservoir be topped off before starting the
treatment process. Refer to “Getting Started with the HaloFogger EXT” above to add/refill disinfectant.
HaloFogger® EXT Operation Manual_1911
