4X4 HDMI Matrix Switch with 4K HDMI & HDBaseT Outputs
7
© Copyright 2018 Hall Research, Inc.
2.
Press the input button you want to tie to. This will make the selected
input button blink. Blinking button designates it as a “candidate”
choice; an actual tie is not made until you press the SET button.
3.
Press the SET button. If you do not press the SET button, after a few
seconds, the process times out and button lights go out.
Example:
Route output 1 to input 2
3.2.7 Making a tie starting from input
Routing from the input end is similar to the above but an input can be routed to
multiple outputs.
1.
Press one of the input buttons. That button will light up in solid along with
ALL the outputs currently routed from that input.
Note: you can use the
navigation (
▲▼
) buttons to view the previous or next Input routing.
2.
Select all the outputs you wish to route to. Candidate outputs can be
multiple and all will be blinking until the SET button is pressed. To remove
a candidate, press the blinking output again.
3.
Press SET to apply the changes.
Example:
Route Input 1 to Output 1, 2 and 3
3.2.8 Blanking Outputs
The matrix allows the output to be blanked. You can blank a particular output or
you can blank all the outputs that are connected to a specific input.