4X4 HDMI Matrix Switch with 4K HDMI & HDBaseT Outputs
9
© Copyright 2018 Hall Research, Inc.
3.
Press SET to recall the preset.
Example:
Saving preset #1 from the previous example
3.3.3 Editing or Copying Presets
1.
To edit a saved preset, press PRE button.
2.
Hold the preset number you want to edit on the input button until you see
the prompt "Editing Preset #" on LCD.
3.
Start changing the preset config from the output end just like making ties
from the output end. Holding an entry will clear the output. Unassigned
outputs will be blanked by default.
4.
Press SET and select the preset number you want to copy. Note that you can
even copy the preset to the number you started editing.
5.
Press SET again the save the new preset.
Example:
Edit output 1 in Preset #1, which is saved in previous example and
saving it to preset #2
3.4 Using the IR Remote to route video
The IR Remote included with the Matrix allows simple control of
the matrix. You can use the IR remote to power the matrix on/off
and you can use it to make video ties.
