manualshive.com logo in svg

Hall Research Technologies Genesis Series, User Manual

Get the most out of your Hall Research Technologies Genesis Series with our comprehensive User Manual. Easily download this essential manual for free from our website and unlock the full potential of your Genesis Series product. Explore detailed instructions and key features to optimize your experience.

Share
Download
background image

 

 

 

25 

Genesis™ Matrix Switches 

3.2 Control Commands (RS-232 and IP) 

The Genesis™ Matrices can be controlled via an external control system by using 
either the standard RS-232 or the optional IP port. Any program capable of 
standard serial communication in ASCII format is capable of working with the 
matrix. Most PCs with Windows™ OS have HyperTerminal™ or equivalent. 
There are also many free Terminal Emulator and Telnet software available for 
download on the internet. 

Note on RS-232 port availability on your PC 

Most PCs and notebooks do not have a serial port. So to program the 
Matrix Switch you may need a USB to RS-232 Serial converter. These 
are available from Hall Research (Model USB-RS232-1). 

 Figure 15 – USB to RS-232 Adapter 

 

Use Figure 8 to connect the unit to the PC’s serial port. Use 9600 Baud, 8 bits, No 
Parity, 1 Stop bit, No flow control. 
Upon power up, the Matrix will output a screen similar to the figure below 
through its serial port(s). 

 

Figure 16 – Power on screen

 

 

Note on RS-232 commands 

When the front panel is in use (for example to make new ties or recall 
presets, etc), only status request commands are accepted.  Any other 
command will be prompted with the following response: 

   

Front panel is in use<cr>

 

 

All front panel operations have a timeout function so even if a user 
started to use the panel but forgot to finish the process, it will time out 
in a few seconds and full serial port functionality will be restored. 

 

© Hall Research 
Version 2.4 
Build # 17 
VSM-16-16 

Summary of Contents for Genesis Series

















































Reviews:

No comments

Related manuals for Genesis Series

D-Link DES-1018P User Manual preview
DES-1018P
Brand: D-Link Pages: 14
3Com 4007 Release Note preview
4007
Brand: 3Com Pages: 128
3Com 4005 Datasheet preview
4005
Brand: 3Com Pages: 2
3Com 4200G 12-Port Configuration Manual preview
4200G 12-Port
Brand: 3Com Pages: 422
3Com 3CR16708-91 - OfficeConnect Managed Switch 9 Datasheet preview
3CR16708-91 - OfficeConnect Managed Switch 9
Brand: 3Com Pages: 4
3Com 3CR13501-73 Release Note preview
3CR13501-73
Brand: 3Com Pages: 5
3Com 3CR13500 Software Install Manual preview
3CR13500
Brand: 3Com Pages: 30
3Com 5500G SERIES Getting Started Manual preview
5500G SERIES
Brand: 3Com Pages: 36
3Com 3CNJ220-CRM Datasheet preview
3CNJ220-CRM
Brand: 3Com Pages: 4
3Com Baseline 2226-PWR Plus User Manual preview
Baseline 2226-PWR Plus
Brand: 3Com Pages: 77
3Com 3CRWX120695A Reference Manual preview
3CRWX120695A
Brand: 3Com Pages: 570
3Com OfficeConnect WX1200 Release Note preview
OfficeConnect WX1200
Brand: 3Com Pages: 28
3Com Baseline 2226-PWR Plus Datasheet preview
Baseline 2226-PWR Plus
Brand: 3Com Pages: 4
3Com CoreBuilder 6000 Supplementary Manual preview
CoreBuilder 6000
Brand: 3Com Pages: 31
K-Dyne OMP L80-P Manual preview
OMP L80-P
Brand: K-Dyne Pages: 10
Inline MSV0502 Operation Manual preview
MSV0502
Brand: Inline Pages: 26
SMART-AVI RDU-8P Quick Start Manual preview
RDU-8P
Brand: SMART-AVI Pages: 2
LEGRAND Raritan Dominion LX II Quick Setup Manual preview
Raritan Dominion LX II
Brand: LEGRAND Pages: 7

Brands by name

Popular brands

Load more brands