Maintaining and Servicing the Wind Cones
Replacing a 120 VAC Internal Halogen Lamp
1.
Remove the lamp cover by twisting it counterclockwise.
2.
Remove the lamp from the socket.
3.
Using a glove, push a new lamp back into the socket.
CAUTION: Do not touch the lamp glass with fingers. Oil on skin
may shorten the life of the lamp.
4.
Replace the lamp cover.
Cover
Figure 21. Replacing Internal Halogen Lamps
HBA156
Replacing a 120 VAC External Halogen Lamp
1.
Loosen the retaining screw on the bottom of the lamp housing.
2.
Pull off the Lamp Housing Cover.
3.
Unscrew the old lamp and install the replacement.
4.
Install the Lamp Housing Cover and tighten the retaining screw.
Lamp Housing
Cover
Retaining Screw
Figure 22. Replacing 120 VAC External Halogen Lamps
HBA156a
40
L-807 and L-806 Wind Cone Installation and Maintenance Manual
