Replacing Lamps
TABLE 3. Monthly Maintenance Recommendations (Continued)
Component
Action
Check lights for dirty lenses.
Clean with a soft damp cloth.
Check base of pole for excessive vege-
tation growth.
Check winch cable for fraying or corro-
sion (L-807 Only).
Remove vegetation.
Replace if needed.
TABLE 4. Semi-Annual Maintenance Recommendations
Component
Action
Check wiring for cracked insulation.
Call a qualified electrician, repair as neces-
sary.
Check wind sock for missing eyelets.
Replace sock.
Check wind sock for fading.
Replace sock.
Make an insulation reading and com-
pare results with standards and previous
readings.
Replace if needed.
Check winch for proper operation.
Replace if inoperative.
Check bearing lubrication
Lubricate basket bearings
Replacing Lamps
The following table lists the halogen replacement lamps.
All models
with LED lamps have a rated lamp life of 50,000 hours. All LED
lamps are repaired by replacing the entire housing assembly.
Contact Hali-Brite
®
for LED lamp replacements.
NOTE: If a lamp has burned out always replace all of the lamps at the same
time. This will reduce maintenance costs.
TABLE 5. Halogen Replacement Lamps
Power
Replacement Lamp
Rated Lamp Life
Obstruction Light
120 Volt
116 W, TS 120 V
8000 hrs
Internal Flood Light
120 Volt
Halogen 100 W, 120 V
2000 hrs
External Flood Light
120 Volt
Halogen 75W PAR16
2000 hrs
NOTE: See Table 6 on page 42 for part number information.
L-807 and L-806 Wind Cone Installation and Maintenance Manual
39
