EB+ CAN Hub
Installation
Guide
20
Innovative Vehicle Solutions
2020
Before inserting the ISO 7638 blue coloured 7-pin cable
connector, ensure contact pins and seal are clean and
free of any contamination prior to the installation.
Position ISO 7638 cable on the slide lock housing,
insert connector fully home.
Make sure that the connector is fully inserted into the
ECU slide lock housing.
Push in the blue lock slider.
Do not use extreme force to push in slider.
Warning:
›
If difficulty is encountered in locking the slider, check
plug or connector for correct fitment
›
If the white o-ring is visible, the plug is not installed
correctly and slider will not lock into position
