EB+ CAN Hub
Installation
Guide
31
2020
Innovative Vehicle Solutions
Program ECU icon should now be active.
Click icon to program configuration to Gen3:
Click "yes" to confirm the programming:
Click “tick” icon (OK) to return to previous icon bar:
When the programming of the Gen3 has finished click
“tick” icon (OK) to return to main DIAG+ dialog:
Check displayed VIN is as expected:
The local Gen3 VIN has now been latched into the EB+ CAN Hub.
Now complete the CAN Hub configuration “double reset” – power down; power up then wait minimum 20
seconds whilst the CAN Hub configures; then repeat again. This will allow CAN Hub to fully recognize the change.
