EB+ CAN Hub
Installation
Guide
14
Innovative Vehicle Solutions
2020
ON
OFF
2 sec.
ON
OFF
2 sec.
2 sec.
@ 10 km/h
ON
OFF
2 sec.
ON
OFF
2 sec.
2 sec.
@ 10 km/h
Option A
On for 2 seconds
Warning device OK and system
self-checking
Off
System self-checked (not sensors)
Option B
On for 2 seconds
Warning device OK and system
self-checking
Off for 2 seconds
System self-checked and preparing to
check sensors
On until moving
System waiting for vehicle to move
above 10 km/h in order to check that
sensors are working
Off
Once the vehicle is moving above
10 km/h and the warning device clears,
the electronic system is fully checked
System check procedure
1. On power up of the system, the warning device
must indicate one of the following sequences in order
to show a fault free system:
Option ‘A’
Option ‘B’
2. During the self-check procedure, the system cycles
the EPRV’s. With foot brake applied one exhaust of air
from each EPRV will be audible.
Once these two checks are made with correct results,
no further checks are required.
If the results are not satisfactory, Haldex DIAG+
software or EB+ Info Centre should be used to establish
the diagnosis.
