Halcyon Streamline P-Valve, Installation Manual

Page: 9 / 12

9
Several careful rinses of the p-valve with a mild vinegar/water solution are rec-
ommended periodically. Many users have found that a standard restaurant style
squeeze bottle or large bore medical syringe work well to introduce the solution
through the catheter interface, and fl ush the valves thoroughly.
Check valve replacement
To inspect or replace the main umbrella valve, unscrew the button cap set screw
(if used) and remove the threaded cap. Lift the edges of the umbrella valve to
expose the center stem. Grasp the stem fi rmly, and gently work it free with a
side-to-side rocking motion.
To install a new umbrella valve, slip the center stem into the retaining hole in
the middle of the valve face. Apply gentle pressure to the center of the umbrella
valve, until it becomes fully seated.
To inspect or replace the balance check valve within the internal valve body, use
a coin to unscrew the retainer. The duckbill valve can then be removed for inspec-
tion/replacement. When reinstalling the retainer, be sure not to over-tighten the
fi tting.
P-valve Parts
FTP
80.000.199 Streamline P-Valve stainless set screw 1.00
40.044.012 Streamline P-Valve umbrella “fl apper” valve 2.00
40.044.009 Streamline P-Valve duckbill check valve 5.00
40.044.002 P-Valve hose (cost per/ ft), for any Halcyon P-valve 7.00
40.044.003
P-Valve connector for catheter, for any Halcyon P-
valve
3.00
40.041.028 Medium 28mm condom catheter for P-Valve 5.00