Halcyon Streamline P-Valve, Installation Manual

Page: 7 / 12

7
ing through the hole in the suit. Apply a small dab of Aquaseal to the threads
of the nipple with the tip the applicator.
Screw the outer portion onto the threaded
nipple until it is tightened against the
base unit. Using the supplied installation
wrench, hand-tighten the assemblies to-
gether. Be careful not to over-tighten this
connection. Position the suit so that none
of the Aquaseal areas will rest on the suit
while it is drying to the manufacturer’s
specifi cations, two hours.
Once the valve installation is complete
and the sealant is dry, carefully thread
the external cap and screw it down until
snug at the suit shoulder. If you want to
After applying Aquaseal to the base of the valve (top left), work quickly to
position the valve assembly in the desired direction within the suit and then press
to seal the fabric on the base. Apply Aquaseal to the top seating surface, thread,
then use the supplied wrench to hand-tighten valve.