Halcyon Streamline P-Valve, Installation Manual

Page: 4 / 12

4
Installation
You will need the following:
Halcyon Streamline P-Valve
Aquaseal (supplied)
Applicator suitable to spread Aquaseal, such as a clean, thin rod etc.
Halcyon P-Valve installation wrench (supplied)
Device capable of creating a hole in your suit such as a 3⁄4” (19mm)
punch or pencil soldering iron
60 or 80 grit sandpaper (supplied)
Isopropyl (Rubbing) alcohol
Dry or Wet Suit
Assistant (very helpful, though not necessary)
Gloves (when handling sealant)
1) Deciding on a Location
Installation of the assembly is a fairly simple process once one overcomes the
resistance to putting a hole in your dry or wet suit.
Carefully choose the area where the valve body will be installed. Location is most
commonly on the inner thigh. It is recommended that you don your suit fully
(including undergarments) while determining valve placement. Mark your posi-
tion of choice with chalk or fabric marker.
It is important to note that divers vary in their preference for the connection
tube location. Some individuals prefer to “dress left” or “dress right.” This prefer-
ence would dictate a location on the left or right thigh. You will also need to
decide if you want to angle the valve up with the connection tube running over
the underwear and down to the Delrin base.