HAKO Scrubmaster E10, Instruction Manual

Page: 9 / 30

9
Assembly
The Hakomatic is delivered in a card-
board box. The bottom is a wooden
pallet to which the machine is fas-
tened by plastic straps. Open the bot-
tom side of the box and pull it
upwards, then loosen the straps and
take the machine from the pallet.
Before Operation
1. Upon delivery, the Hakomatic has
been secured by insulation blocks at
the bottom and the top to preclude
unwanted movement of the machine.
After taking the machine from the pal-
let:
(I) Open the cardboard box at the
top side
(II) Remove the insulation blocks
(III) Take the Hakomatic off the box
and avoid any damage to the
machine
(IV) The operating handle of the
Hakomatic is still in its
transport position.
Caution: Mains-operated
machine! Qualified personnel
only is admitted to open the
machine; Any work such as e.g. main-
tenance or repair actions at the elec-
tric components have to be executed
with adequate tools only and by quali-
fied personnel only (e.g. for Germany:
observe VED 0701 standard,
parts 1 and 3).
2. After taking the Hakomatic to its
park position, set the operating handle
into its working position by releasing
the button at the side. After the handle
has been set into service position,
engage the button again to preclude
the handle from displacing.
After operation, the handle can be
folded back again as described above.
In this folded position the handle is
protected against damages and
requires less storing space.
First Operation
Bottom insula-
tion block
Top insulation
block
9
Assembly
The Hakomatic is delivered in a card-
board box. The bottom is a wooden
pallet to which the machine is fas-
tened by plastic straps. Open the bot-
tom side of the box and pull it
upwards, then loosen the straps and
take the machine from the pallet.
Before Operation
1. Upon delivery, the Hakomatic has
been secured by insulation blocks at
the bottom and the top to preclude
unwanted movement of the machine.
After taking the machine from the pal-
let:
(I) Open the cardboard box at the
top side
(II) Remove the insulation blocks
(III) Take the Hakomatic off the box
and avoid any damage to the
machine
(IV) The operating handle of the
Hakomatic is still in its
transport position.
Caution: Mains-operated
machine! Qualified personnel
only is admitted to open the
machine; Any work such as e.g. main-
tenance or repair actions at the elec-
tric components have to be executed
with adequate tools only and by quali-
fied personnel only (e.g. for Germany:
observe VED 0701 standard,
parts 1 and 3).
2. After taking the Hakomatic to its
park position, set the operating handle
into its working position by releasing
the button at the side. After the handle
has been set into service position,
engage the button again to preclude
the handle from displacing.
After operation, the handle can be
folded back again as described above.
In this folded position the handle is
protected against damages and
requires less storing space.
First Operation
Bottom insula-
tion block
Top insulation
block