HAKO Scrubmaster E10, Instruction Manual

Page: 7 / 30

7
Park Position
If not operated, the Hakomatic has to
be stored in its park position. This
position is attained by using the sup-
port roller located at the front of the
machine as represented. Actuate the
support by a lever located above the
support roller (see
Pos.1
) and the brush
head of the machine is lightly lifted.
This is to preclude deformation of the
brushes.
Handling Mains Cables
Make sure that the mains cables are
not damaged by passing over them,
by pinching pulling or other impacts.
Check the mains cables for aging and
damages at regular intervals. Replace
them by the type H05VVF3Gx1.5 as
specified by the manufacturer. When
replacing the coupling plug of the
mains cable or when connecting lines
respect the splash water protection
and the tensile strength of the compo-
nents.
General Safety Instructions
7
Park Position
If not operated, the Hakomatic has to
be stored in its park position. This
position is attained by using the sup-
port roller located at the front of the
machine as represented. Actuate the
support by a lever located above the
support roller (see Fig.) and the brush
head of the machine is lightly lifted.
This is to preclude deformation of the
brushes.
Handling Mains Cables
Make sure that the mains cables are
not damaged by passing over them,
by pinching pulling or other impacts.
Check the mains cables for aging and
damages at regular intervals. Replace
them by the type H05VVF3Gx1.5 as
specified by the manufacturer. When
replacing the coupling plug of the
mains cable or when connecting lines
respect the splash water protection
and the tensile strength of the compo-
nents.
General Safety Instructions
Parking Position Parking Position
Working Position Working