HAKO Scrubmaster B400 R, Operating Manual

Page: 157 / 170

Scrubmaster B400 R (7190)
157
Attachments/options
6.7 Battery changing system
The battery changing system is an optional accessory for the Scrubmaster
B400 R and is used exclusively for easy transport and changing of the battery.
The battery changing system ensures that a charged battery is always availa-
ble and can be changed at short notice if necessary. A hand pallet truck with a
lifting height of 200 mm is also required.
Changing the battery
Warning
• Change the battery only on level ground, never on sloping or
uneven ground.
• Wear safety shoes when changing the battery.
• Risk of crushing at the roller supports on the vehicle and on the
battery changing rack.
Do not touch the roller supports on the vehicle and on the battery
changing rack while the battery is moving!
• Risk of crushing when lifting and lowering the battery changing
rack.
Do not reach between the lift truck and the battery changing rack
when lifting!
Do not touch the contact surfaces!
When lowering the battery changing rack, keep sufficient distance
to the feet of the battery changing rack!
• Risk of crushing while the battery is moving.
Do not stay in the battery changing rack while the battery is
moving!
Attention
• When using other batteries which have been approved by Hako,
the BMS must be reset to protect the battery against total
discharge. The settings of the BMS must only be carried out by a
Hako service workshop!
• Only use hand pallet trucks with a maximum lifting height of
200 mm, otherwise there is a risk of damage.
Note
When lowering the battery changing rack on the machine, apply
pressure towards the machine so that the battery changing rack does
not move away from the machine.