HAKO Scrubmaster B400 R, Operating Manual, Page: 131 / 170

Scrubmaster B400 R (7190)
131
Maintenance and servicing
1. If present, unlock the side collision protection Fig. 49-3 on the left side of
the machine, raise it slightly and swivel it to the side.
2. Raise the side wiper Fig. 49-4 on the left side of the machine and swivel it
to the side.
3. Close the ball cock Fig. 49-2 .
4. Caution!
Do not lose the seal in the filter cap.
Turn the filter cap Fig. 49-5 anti-clockwise and remove it.
5. Remove the filter sieve Fig. 49-6 from the filter housing and clean it under
running water. Replace the filter sieve as required.
6. Caution!
Screw in the filter cap only hand-tight, otherwise the seal may be
destroyed.
Insert the filter sieve into the filter cap and screw in the filter cap clockwise
hand-tight.
7. Open the ball cock.
8. Swivel back the side wiper and hook it in.
9. If present, swivel back the side collision protection and hook it in.