23
Operation
2.5
Sweeping operation
1. Check the vehicle , refer to Section
2.2.
2. Start the vehicle, refer to Section 2.3.
3. Set the engine speed switch (Fig. 7/
1) to working speed (Hare).
4. Switch on the sweeping function with
the button (Fig. 7/A). The rotary
brush, side brush and suction turbine
are activated.
5. In the case of damp waste, switch
the suction turbine off with the button
(Fig. 7/B).
6. Release the parking brake (Fig. 7/2)
to its end position.
7. Slowly press the accelerator (Fig. 7/
3) until the required driving speed is
reached.
8. It is recommended to clean the filter
regularly. To do this, actuate the but-
ton (Fig. 7/C).
9. Check the contents of the sweepings
container regularly. Empty the
sweepings container as necessary.
Fig.7
2
1
A
B
C
1
3
3