HAKO 7580.02, Service Booklet

Page: 8 / 116

Foil 8
Settings on the control electronics/panel which have to be set and checked on
each machine:
In contrast to the Hakomatic B1100, scope of performance of the Hakomatic B1050 is
reduced and does not feature all the options available in the Hakomatic B1100. The
Hakomatic B1050PB (Plate Brush aggregate) has the side scrub unit optionally
available only; the Hakomatic B1050CB (Cylindrical Brush aggregate) has the side
broom unit optionally available, while the pre-sweeper, dirty water recycling and
cleaning agent dosage (99756402) options are available and settable for the
Hakomatic B1100 only. The B1050 PB 1230 doesn´t have any options adjustable via
the control moduls of the machine control system.
The Hakomatic B1100 PB1230 is equipped with the pre-sweep unit generally.

Machine type

TSG (low discharge signal sender - also called LDS)

Options

Delete display of last error after repair

Programme variants depending on the accelerator position
2.1 Settings