HAKO 7580.02, Service Booklet

Page: 13 / 116

Foil 13
The machine is equipped with a seat switch. Activation of this switch is required before
switching key switch on since otherwise sweeping and scrubbing functions (even in
combination) are locked. If the seat switch is not activated, suction can only be
activated for the „Hand suction hose“ option.
A reset of the machine after it was deactivated by the seat contact switch, is realized
by switching off and on again with the key switch.
Constant activation of the seat switch is also required. Leaving the seat while key
switch is ON causes locking of the functions.
The seat contact switch is 3 seconds delayed.
At the Hakomatic B1050 machines the sequence of switching on the machine (key
switch, seat contact switch), has no influence to the ability of function of the machine.
It is equally required to release parking brake to enable cleaning functions and drive
control is released.
To switch on the “TOOL”-function of the B1050 machines, it is necessary to activate
the brake of the machine.
2.2 Brief Description