HAKO 7580.02, Service Booklet

Page: 31 / 116

Foil 31
4. Programming
Different Procedures
Check
1. Switch off machine by key switch
2. Simultaneously press "N" and "O" buttons and hold depressed, then switch on
key switch
3. Hold both buttons depressed as long as the software version appears in the
display then release both buttons
4.
Viewing the different programmes is possible by pressing the button “L” (down)
or the button “N” (up).
5. The active programme is marked by a dash in front of the cipher
6. Quit programme by switching OFF key switch (do not switch OFF key switch
when proceeding to point “Set”)
Set
1.
Use the “L” or “N” button to select the desired programme
2.
Press the “O” button and hold depressed until the dash appears in front of the
cipher. The programme then is saved and active
3. Quit programme by switching OFF key switch