18
Operation
2.2
Function description
The Sweepmaster is a sweeper exclu-
sively designed for sweeping up dry
and wet waste from floor surfaces as in
production plants, warehouses, car
parks and pedestrian precincts.
Side broom, right
The side broom (Fig. 3/4) sweeps the
dirt from corners and edges in front of
the cylindrical broom. The side broom
can be lowered and raised using a hand
lever. The sweeping pattern can be ad-
justed. It is driven by the central motor
via a drive belt.
Cylindrical broom
The cylindrical broom (Fig. 3/8) sweeps
the dirt according to the overhead
throwing principle into the dirt hoppers
(Fig. 3/9). In the case of larger debris,
the folding apron (Fig. 3/6) can be
opened. The sweeping pattern of the
cylindrical broom and the sealing strips
(Fig. 3/7) in the broom space can be ad-
justed. It is driven by the central motor
via a drive belt.
Filter system
The fine dust swirled up by the cylindri-
cal broom is forced into the panel air fil-
ter (Fig. 3/10) by a suction turbine and
is filtered out. The particulate matter
settles on the outside of the filter ribs
and drops into the two dirt hoppers
(Fig. 3/9). The panel air filter can be
cleaned by means of the shaking de-
vice. The suction turbine is driven by
the central motor.
Dirt hopper
The refuse is ejected into the two dirt
hoppers (Fig. 3/9) via the cylindrical
broom and the panel air filter. The fill
quantity is approx. 25 kg per dirt hop-
per.
Drive
The Sweepmaster is equipped with a
continuously variable adjustment elec-
tric drive (Fig. 3/5).
