22
Operation
Operating hour counter (Fig. 4/4)
It serves to display the operating hours.
The counter only works when the driver
is seated in the seat and the ignition is
switched on.
Sweeping functions switch (Fig. 4/5)
It serves to switch the cylindrical broom,
side broom and suction turbine on and
off.
Position 0: side broom, cylindrical
broom and suction turbine switched off
Middle position: Zero position
Position 1: side broom, cylindrical
broom and suction turbine switched on
When sweeping wet surfaces
or wet refuse, open the bypass
flap.
Drive direction switch (Fig. 4/6)
This serves to select the driving direc-
tion. Control lever forward = forward
drive
Control lever O = neutral position
Control lever back = reverse drive
To change the driving direction, stop
the vehicle by applying the service
brake, select the new direction and ac-
celerate again.
Steering (Fig. 4/7)
The steering transmission from the
steering wheel to the front wheel is per-
formed by a fork head. The small turn-
ing circle enables sufficient
maneuverability to steer away from the
wall.
Horn (Fig. 4/8)
An acoustic signal is issued on actuat-
ing the horn.
Side broom lever (Fig. 4/9)
The side broom can be lowered and
raised using the hand lever.
Lever to front: side broom is lowered.
Lever to rear: side broom is raised.
If the left-hand side broom op-
tion is installed, it is also low-
ered and raised with the lever
(Fig. 4/9).
