60
Maintenance and Service
5.7.1
Shaking the panel air filter
Clean the panel air filter (Fig. 24/1) in
the dust vacuum regularly and as nec-
essary using the shaking device:
Do not inhale dust. Health haz-
ard! Wear an appropriate dust
mask.
1. Switch the vehicle off using the key
switch and secure with the parking
brake.
2. Pull and push the lever (Fig. 24/6) of
the shaking device in and out several
times in succession.
5.7.2
Checking the panel air filter
and seal
Check the panel air filter (Fig. 24/1) and
seal (Fig. 24/2) on a weekly basis and
change them in the case of wear.
1. Switch the vehicle off using the key
switch and secure with the parking
brake.
2. Open the seat console (Fig. 24/8)
and secure with the safety support
(Fig. 24/7).
3. Loosen the knurled nuts (Fig. 24/4)
and locking handle (Fig. 24/5) and
remove the hood (Fig. 24/3).
4. Check the panel air filter (Fig. 24/1)
and seal (Fig. 24/2) and clean or
change them as necessary.
5.7.3 Cleaning the panel air filter
Drop the panel air filter (Fig. 24/1) from
a minimal height a few times onto a lev-
el, solid surface. Be careful not to dam-
age the filter ribs!
The ground surface must not
have any undulations.
Do not drop the panel air filter
onto the ground at an angle.
Never reinstall panel air filter
with damaged filter ribs.
