![background image](http://html1.mh-extra.com/html/hakko-electronics/fx-801/fx-801_instruction-manual_3382119019.webp)
18
10. ERROR MESSAGES
is displayed and a buzzer sounds if the iron cable
is not attached to the station or wrong soldering iron
is connected.
●
Sensor error
●
Low-temperature alarm
tolerance error
Example:
350°C (400°C – 50°C)
Low-temperature alarm tolerance
Set temperature
●
Soldering iron error
When there is possibility that a failure has occured
in the sensor or heater (including the sensor circuit),
is displayed and a buzzer sounds.
If the tip temperature falls below the low-temperature
alarm limit, is displayed and a buzzer sounds.
When the tip temperature rises above the low-
temperature alarm limit, a buzzer will stop.
●
Heater terminal short
circuit error
●
System error
When a system error occurs such as data flash,
the soldering iron is immediately de-energized and
is displayed.
is displayed and a buzzer sounds when the tip
inserted incorrectly, an incompatible tip is inserted,
or a foreign object has found its way into the connector.