background image

● 

Temp Mode

1. Move the cursor to select “Temp Mode”.

 After selecting, press <OK>.

The displayed temperature can be switched between Celsius and Fahrenheit.

2. 

℃ and ℉ will be switched alternately 

if you press the <

> or <

> button.

3. Return to parameter setting display 

if you press the <OK> button after 

setting.

● 

ShutOff Set

1. Move the cursor to select “ShutOff Set”.

 After selecting, press <OK>.

Select whether you will activate the auto shut off function. When the auto shutoff 

function is set to on and no operation is performed for constant time after the iron is 

set in the iron holder, the buzzer sounds three times and the auto shutoff function 

will be enabled. 

2. ON and OFF will be switched alternately 

if you press the <

> or <

> button.

3. Selecting “ON” allows you to make the 

setting for “Timer.” 

(Default is 30 minutes.)

<↑>

<↓>

<OK>

T e m p   M o d e
S h u t O f f   S e t
V a c u u m   M o d e

゚ C

O F F
NOR

<↑>

<↓>

<OK>

T e m p   M o d e   S e t
     
     

゚ F

<↑>

<↓>

<OK>

T e m p   M o d e
S h u t O f f   S e t
V a c u u m   M o d e

゚ C

O F F
NOR

<↑>

<↓>

<OK>

  S h u t   O f f   S e t
S h u t   O f f
T i me r

O F F
30

m

Select

“OFF”

Select

“ON”

(Next page)

14

Summary of Contents for FR-400




































Reviews: