6
Axis Adjustment Controls:
Figure 8: X-Axis Fine Adjust Knob
Figure 9: X-Axis Adjust Handle
Figure 10: Y-Axis Fine Adjust Knob
Figure 11: Y-Axis Adjust Handle
Figures 8 through 11 show the X and Y Axis adjustment controls for positioning the heater head
relative to the board loaded into the board fixture. To move the head left or right, squeeze the X-Axis
adjust handle, and push or pull the head to the desired position. To move the head front to back,
squeeze the Y-Axis adjust handle and push or pull the head to the desired position. Fine adjustments,
such as when aligning a component or nozzle to a PCB, can be made by rotating the fine adjust knob
for the each axis.
