48
Manual Control (Fig.5):
This panel is used for toggling several of the machine’s outputs such as Vacuum and heaters. The
machine can be manually operated by using these controls. (Some fields shown may depend upon
optional equipment.)
Figure 5: Manual Control Panel
Options Panel (Figure 6):
The Options Panel is accessed by clicking on the “View” menu in the Main Screen and selecting
“Options”. From here several configurable options are shown. It is recommended that you consult PMT
or your local representative before changing any of these settings as improper values could allow the
machine to damage itself.
The settings are as follows:
Controller 1 (WRD) COM
This is the Windows COM port that is connected to the port labeled
“Host PC” or “Controller 1” on the rear of the unit
Controller 2 (TriPLC) COM
This is the Windows COM port that is connected to the port labeled
“Option” or “Controller 2” on the rear of the unit.
