Ground terminal (GND)
When using a type of soldering iron that is grounded with an alligator clip, connect the clip to the
GND terminal.
Maintenance and Calibration
• To replace the conduction plate, remove the set screws.
• The life of the temperature sensor will vary depending on the temperature at which
measurements are made and the type of solder and flux being used. In general, temperature
sensors can be used for 50 measurements. Replace the sensor as soon as the measuring
point wears out.
• HAKKO can calibrate the instrument for a nominal fee. Please contact your dealer for further
information.
5. PARTS LIST
Optional Parts
Part No.
Part Name
Spec.
A1310 *
3
Temperature Probe for
soldering pot
C1220
Temperature Probe for
automatic solder machine
*3 Remove the standard sensor, and connect the red
connector of this option to the red terminal of the
HAKKO FG-101 and the blue connector to the blue
terminal. Insert the top of the probe into solder to
measure the temperature.
HAKKO FG-101
Item No.
Part Name
Spec.
B3213 Multi-adapter
B3214 European Adapter
B1752 Conduction Plate
B1754 Ground Clip
B1950 Conduction Wire
B1258 Fuse/250V-3.15A
B2468 Fuse/125V-5A
191-212 Sensor/Lead free
10 pcs.
B2419 Power cord, 3 wired cord &
American plug
B2421 Power cord, 3 wired cord
but no plug
B2422 Power cord, 3 wired cord &
BS plug
India
B2424 Power cord, 3 wired cord &
European plug
220V KTL
230V CE
B2425 Power cord, 3 wired cord &
BS plug
230V CE
B2426 Power cord, 3 wired cord &
Australian plug
B2436 Power cord, 3
wired cord &
Chinese plug
China
中 文
English
日本文
15
