2. SPECIFICATIONS
4. OPERATION
1. Attach the sensor:
• Press the slide button to move the slide
pin closer to the terminal side.
• While holding down the slide pin, attach a
sensor to the slide pin and terminals.
• Connect the red connector of the sensor to
the red terminal and the blue connector to
the blue terminal.
CAUTION
When measuring the temperature of the soldering iron tip or de-soldering nozzle, pay great
attention to the temperature of the tip or nozzle that will be as high as 200 to 450°C (392 to
842°F). Careless handling of such a hot object may result in a burn or fire.
Disconnect the power cord before service/maintenance procedures. Failure to do so may
result in electric shock.
3. SAFETY NOTICE
Slide pin
Conduction
plate
Slide button
Sensor terminals
12
中 文
English
日本文
Model Name HAKKO FG-101
Temperature Resolution
1°C (1°F)
Measurement Range
0 - 700°C (32 - 1300°F) *1
Precision
±3°C (300 to 600°C)/±6°F (572 to 1112°F)
±5°C/10°F (other than above)
Sensor
K (CA) type thermocouple
Voltage
Resolution
0.1mV
Measurement Range
0 to 40 mV (AC)
Precision
±(5% of r1 digit)
Registance
Resolution
0.1Ω
Measurement Range
0 to 40Ω
Precision
±(5% of r1 digit)
Display
LCD
3 1/2 digits
Burnout*2
MAX HOLD
(Refer to "MAX HOLD function.")
Power Consumption
100V-2.6W, 110V-2.9W, 120V-2.6W, 220V-2.7W, 230V-2.8W, 240V-3.0W
Dimensions
200(W)×50(H)×120(D) mm /7.9(W)×2.0(H)×4.7(D) in
Weight
1kg
Ambient Temperature/Humidity Range 0 - 40°C (32 - 104°F), 20 - 90%RH (without condensation)
Environmental condition
Applicable rated pollution degree 2 (According to IEC/UL61010-1)
*1 Temperature sensor (191-212) can only be used to measure temperatures below 500°C (932°F). To measure
higher temperatures, use an applicable temperature probe (see "5. REPLACEMENT PARTS AND OPTIONS").
*2 When a sensor is not attached or it burns out, the alarm symbol of Burnout (-1) is displayed. If the sensor
burns out, replace it with a new one. The same symbol is also displayed when a temperature outside the
measurement range is detected.
Note: * This product meets China RoHS requirements. (See the table at the end of this manual.)
* The specifications may be subject to change without notice.
