8. Install the joint and silicon tube into the handle. (Refer to Photos 11
and 12.)
9. Close the handle and tighten the 3 screws. (Refer to Photo 2.)
•
Install batteries in the handle and close the battery case lid.
•
Attach the bent nozzle and pad. (Refer to Photo 1.)
If the suction force is not recovered even after overhauling, it can be assumed that the pump
has deteriorated. In this case, it is recommended to send the unit in for repair.
Send it to the place of purchase for repair.
*We recommend that you should make sure that no abnormalities are found in the wrist
strap before sending it in for repair.
*Clearly stipulate “repair only” or “repair and calibration” when sending it in for
repair.
