Figure
Pick-up
Performance
6g
40g
80g
120g 6g
40g
80g
120g
Set Examples
(using 392 as
an example)
*The pick-up performance shown above slightly differs depending on the
surface of the object.
With the bent nozzle accessory, 0603-size components can be suctioned.
0603-sized chip resistors are extreme micro-
components that are often incorporated into
devices such as mobile phones.
If they are manually picked up with tweezers, it
requires high-precision manual dexterity so that
they will not be flicked and lost.
For the HAKKO 394, a very fine bent nozzle with
0.26mm hole diameter (A1198) which can be
used for 0603-sized components is available. The
nozzle ensures safe pick-up operation in
continuous suction mode.
With the best suited pad selectable from a wide variety of pads, delicate bulb-shaped
components can be safely picked up
Four types of pads in sizes of
φ
3,
φ
5,
φ
7
and
φ
10 respectively are available for
HAKKO 394.
Suction pick up can be continuously and
easily performed only by matching the pad
to the size of the suction object.
Also, the stopper function of the HAKKO
394, which is enabled when a pad is used,
prevents the suction object from being
damaged.
