Hakko Electronics 373, Instruction Manual

Page: 9 / 15

8
Replacement of Parts
1. When you change the
Solder Diameter
Please replace the parts indicated on the following chart when
you change solder diameter.
Solder Dia.
Adjustment Ring
replace
replace
replace
replace
Changing matter
From the range of 0.6~1.0mm to the range of 0.6~1.0mm
From the range of 1.2~1.6mm to the range of 1.2~1.6mm
From the range of 0.6~1.0mm to the range of 1.2~1.6mm
From the range of 1.2~1.6mm to the range of 0.6~1.0mm
Nozzle
replace
replace
replace
replace
Guide
Pipe
same
same
replace
replace
Tube
Unit
same
same
replace
replace
2. When you change the
Soldering Iron
Please replace the tube unit and guide pipe asse’y, when
you change the soldering iron. It is not necessary to replace
the parts if the items are in the same frame in the following
chart. Foot switch is necessary if you use the HAKKO
MACH- I .
Tube Unit
Guide Pipe Asse’y
900M, 900L, N452, N453, N454 902, 903, 904
N452, N453, 900M N454, 900L 920, 921, 922 918
918, 920, 921, 922 907, 908
902, 903, 904 907 908