HAKKI PILKE RAVEN
TRANSLATION
VERSION 1-2015
4.7 CHANGING THE OIL
Change the hydraulic oil of the firewood processor as follows:
1.
Turn off the machine and disconnect
it from its power sources.
2.
Open filler cap A of the hydraulic oil
tank in Figure 28 (this will allow the
oil to drain more easily).
3.
Open drain plug B (Figure 29) and
drain the oil into a suitable contain-
er.
4.
Open the hydraulic filter cover C
(Figure 28) and replace the filter.
5.
Tighten plug B firmly, and fill the
tank with fresh oil (approx. 40 litres).
6.
Finally, ensure that the oil level set-
tles at the halfway point of gauge D
(Figure 30).
Figure 28.
Figure 29.
Figure 30.
