HAKKI PILKE RAVEN
TRANSLATION
VERSION 1-2015
Placing the output conveyor in the operating or transport position
Place the output conveyor in the operating position as follows:
1.
Ensure that there is sufficient room for
opening the output conveyor.
2.
Turn off the machine and disconnect it
from the power source.
3.
Keep lock A (Figure 5) open and lower
the output conveyor using a winch to its
lowest position.
4.
Turn the upper section of the conveyor
into the operating position using handle
B (Figure 6).
5.
Turn support bar C on the output con-
veyor belt (Figure 7) to the side.
Figure 5.
Figure 6.
Figure 7.