Haiwell IoT Cloud HMI User Manual
19 / 28
The routing modes include:close routing / AP point mode / 4G routing mode / client mode / The repeate mode / 4G client
mode, the specific use of each routing mode will be described below.
Routing configuration
The routing modes include:close routing / AP point mode / 4G routing mode / The repeate mode / client mode/ 4G client mode,
the defaut is "Close routing"
Comparison of various routing modes and network types:
Close routing
(Routing switch)
AP MODE
4Grouting mode
Repeate mode
Client mode
4G client mode
Ethernet
LAN / Internet
LAN / Internet
LAN
LAN
unsupported
unsupported
WIFI
LAN / Internet
unsupported
unsupported
Connect to the Internet Connect to the Internet
unsupported
Hotpot
LAN
LAN / Internet
LAN / Outer net
LAN / Internet
unsupported
unsupported
4G
Outer net
unsupported
Internet
unsupported
unsupported
Outer net
Network provided
Ethernet/WIFI/4G
Ethernet
4G
WIFI
WIFI
4G
Close routing mode
Enter the HMI background settings interface, click [Network], enter the route configuration interface, click "Settings", click
"Close routing", a prompt "This mode will will close the route, confirm the routing mode is closed" Click "OK", it is set to close
routing
"Close routing" mode, only turn off the Ethernet, WIFI, 4G routing function. The hotspots open in this mode only support LAN
networks, and do not support Internet access. The function settings of Ethernet, WIIF and 4G remain unchanged.