Using the Remote Control
MENU Items
Stingray
2 User’s Guide, v6.0, Issue 01
26
SLEEP
Select an interval in the menu to specify how long before the STB is automatically placed
in standby. The selections are OFF, 15, 30, 45, 60, and 90 minutes. An example would be
selecting 15 then pressing OK - this starts a 15 minute countdown before the STB is auto-
matically placed in standby.
SWAP
If a dual-stream asset is active, pressing the SWAP button causes the Picture-in-Picture
(PIP) stream to change positions with the primary video stream.
V1, V2, V3
The Stingray
2 tunes the “favorite” channel configured for the button. See
“Favorites (V1,
V2, V3)”
under the MENU button for how to set your favorite channels.
CHANNEL SELECTION
At any time you can change to any particular channel by entering the channel number with
the keypad and pressing the ENTER button.
ENTER / FLASHBACK
Pressing Enter after typing a channel number forces the STB to tune the channel immedi-
ately rather than waiting for 3 seconds after the last channel number is pressed. For
example, if you want to tune channel 307, press “3” then “0” then “7” and press Enter – the
tune occurs immediately.
When viewing a channel, pressing this button tunes the previously viewed channel.
MENU Items
Pressing the MENU button displays the preferences screen that enables you to manage your
favorite channels, ToDo List, and various system settings. Use the
NAVIGATION
ARROWS
to highlight an item, and then press the OK button. The following choices are
available.
Favorites (V1, V2, V3)
This screen allows you to program your top three favorite stations on the remote control.
Scroll down the channel list until the channel you want as a favorite is highlighted. Then
press any one of the V1, V2 or V3 buttons. It saves that channel for the button you used.
To select any of your favorite channels you can just use the V1, V2 or V3 button at any
time. You can overwrite any of the channels that are already programmed by selecting a
