Initial Setup
Stingray
2 User’s Guide, v6.0, Issue 01
20
a. On the Provisioning Address page, type in the IP Address of the licensing server
or portal server. The default port number is 4902.
b. Select Accept Changes.
c. When prompted, enter your password.
NOTE
The STB will
either
connect to a “realm” if available and selected,
or
it will use the
Provisioning Address. The most recent selection will take precedence.
6.
To configure the network settings for the STB, on the Settings options page select
Network Settings.
By default, DHCP is enabled for the STB.
