•
Do not clean any part of your Food Processor in a dishwasher.
•
Do not submerge ay part of the main body, plug or mains cable in water or
any other liquids.
•
Empty the jug/bowl of excess waste.
•
The bowl, jug and all other detachable parts should be hand washed in
warm soapy water.
•
Clean the motor unit with a soft damp cloth and dry thoroughly.
•
Do not clean any part of your Food Processor with any harsh or abrasive
cleaners.
Troubleshooting
Problem
Possible Solution
Machine not operating
Check the appliance is plugged in and main
switch is on.
Power on but machine
still not operating
Ensure bowl/jug is fully locked onto the power
base and the interlock switch is engaged.
Motor running but
blades not turning
Ensure blades/spindles are fully located in place
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug
has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the discarded
plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must be
connected as shown below. The wires in the mains lead fitted to this
appliance are coloured in accordance with the following code:
Brown wire = Live (L)
Blue wire = Neutral (N)
Connect
Brown to
Live (L)
Connect
Blue to
Neutral (N)
Ensure the outer sheath is
securely held by the cord
clamp
Summary of Contents for SDA1074
Page 1: ...IMPORTANT SAFEGUARDS ...
Page 10: ......