Hairy Bikers SDA1074, Manual

Page: 6 / 10

6. Place food down the chute to be sliced, shredded or chopped.
CAUTION: Always use the tamper provided to push food down the chute
NEVER use finger or any other implement.
Instructions for use
Place the motor base on a flat, level and dry work surface.
Fitting the Processor Bowl
1
1. Sit the Processor Bowl onto the motor
base so that it sits level and stable, (The
handle should be slightly to the right of
the control panel).
2. Grasp the bowl handle and rotate the
bowl clockwise until it locks into place,
(an audible click can be heard, this is an
interlock switch and the processor will not
operate without it).
3. If using the Cream Whisk, Chopping
Blade or Kneading Blade then use the
Short Spindle, if using the Slicing/Grating
Blades then fit the Long Spindle, this is done by simply fitting it over the Short
Spindle and rotating until it falls into place.
4. The Food Processor comes complete with three slicing/grating attachments,
these should be fitted into the blade mounting disc which is then fitted onto the
gear at the top of the long spindle.
5. Once the desired tool has been fitted, place the lid onto the bowl and lock in
place by rotating it clockwise until an audible click is heard, this also activates an
interlock micro switch that allows the processor to be used.