Fitting the Blender Jug
function, (To avoid the motor overheating it should be used for periods of no
more than 30 seconds with a 30 second break in between).
CAUTION: Never stick fingers or any other implement into the blender.
Fitting the Coffee/Spice Grinder
Cleaning and maintenance
•
Always unplug the Food Processor from the mains power supply before
cleaning.
•
Allow the appliance to cool before cleaning.
1. Sit the Blender Jug onto the motor base
so that it sits level and stable, (The
handle should be slightly to the right of
the control panel).
2. Grasp the handle of the Blender Jug and
rotate the jug clockwise until it locks into
place (an audible click can be heard, this
is an interlock switch and the blender will
not operate without it).
3. Place the food to be blended into the jug
and lock the lid into place by rotating it
clockwise.
4. Select high speed, low speed or pulse
A
B
1. Place the coffee beans/spice into the
grinder cup (A) and screw on the grinder
blade assembly (B). Ensure the
assembly is fully tightened onto the cup.
2. Place the grinder onto the motor base
and lock into place by rotating clockwise,
engaging the interlock micro switch.
3. Select the required grinding speed, it is
recommended that the pulse function is
used for grinding to give greater control.
Summary of Contents for SDA1074
Page 1: ...IMPORTANT SAFEGUARDS ...
Page 10: ......