MANDO Adapt T611.
Assembly
english
WARNING!
Risk of injury!
Tools and gages that are thrown out of the ma-
chine can cause injury.
Remove all tools and gages from the working
area of the machine before the machine is star-
ted up.
Risk of injury!
If the clamping pressure is too low clamped work
piece may be thrown out.
If the clamping pressure is too high severe dam-
ages of the components of the clamping device
may occur the throwing out of the work piece.
Before operation set the operation pressure
back to operation level.
The operating pressure should be checked and
adjusted regularly!
6.3 Work piece
WARNING!
Risk of injury due to thrown out parts!
During clamping of the work piece and the pro-
cessing parts can be thrown and cause severe in-
juries and property damage.
Check the clamping diameter of the work piece.
Tighten only work pieces that meet the dimen-
sional requirements.
For clamping very long work pieces use in ad-
dition a tailstock / a steady rest for support.
Do not exceed the maximum clamping pres-
sure.
Make sure that the correct supply pressure
[neither too high nor too low] is set.
Order H49 [0]7144. 907-333
31