MANDO Adapt T611.
Safety
english
2.8 Screws
Moving parts
WARNING!
Danger of injury due to screws and
stud screws being accelerated out of
the device!!
Screws and stud screws radially attached to the
product can be accelerated out of the device and
cause severe injuries.
At the product radially mounted screws and
stud screws which were loosened for assembly
and maintenance must be re-tightened with the
correct tightening torque!
The tightening torque is shown in the assembly
drawing of the product or it is engraved on the
device itself in the direct vicinity of the screw or
stud screw.
All screws or stud screws that are not marked
with a tightening torque specification are
tightened with the prescribed tightening torque
and locked [medium-strength bonding] in the
factory and should only be unscrewed after
consultation with the manufacturer. If in doubt
you must contact the manufacturer immediately
do determine the subsequent procedure.
2.9 Functionality
NOTICE!
With high contamination of the clamping device
the functionality is no longer guaranteed.
The cleaning and maintenance intervals must be
observed.
Order H49 [0]7144. 907-333
15