MANDO Adapt T611.
Assembly
WARNING!
Risk of injury!
Bending in the working area of the machine can
cause severe head injuries!
CAUTION!
Risk of injury!
Unexpected start up of the tool spindle can cause
severe injury.
Make sure that the system is pressure-free and
that a restart of the machine can be excluded!
Risk of injury!
Contamination of the mechanism can
influence/reduce the stroke, thus the clamping
force is reduced and thus, the work piece is not
properly tightened and can be thrown out.
Clean the product regularly [see chapter
»
Maintenance and service
«
].
Risk of injury!
If the clamping pressure is too low clamped work
piece may be thrown out.
If the clamping pressure is too high severe dam-
ages of the components of the clamping device
may occur the throwing out of the work piece.
Before operation set the operation pressure
back to operation level.
The operating pressure should be checked and
adjusted regularly!
The dimension of the work pieces should be
checked regularly [clamping-ø]!
28
Order H49 [0]7144. 907-333