MANDO Adapt T611.
Assembly
Fig. 6
1. Remove the assembled clamping head [1] by using
the changing fixture [2].
Fig. 7
2. Loosen the three clamping screws [2] at the circumfer-
ence of the clamping device by using an allen wrench
[1].
Fig. 8
3. Remove the base end-stop [1].
Fig. 9
4. Loosen the three countersunk screws [3] at the sheet
metal [1] by using an allen wrench [2].
5. Remove the sheet metal [1].
26
Order H49 [0]7144. 907-333