HYDROK
Removal
88
Order h49 7144.907-333
10.2 Preparing the machine for removal
1. Set the machine into set-up mode.
2. Reduce the operating pressure to a minimum.
3. Remove cutting tools and/or sharp objects from the
working area of the machine, or cover them.
4. Remove operating and auxiliary materials as well as re-
maining processing materials and dispose of them in an
environmentally responsible manner.
10.3 Removal of the changing parts
A
Changing part variant x-times axial screw connection
A1 Fixing screws changing part variant x-times axial screw connec-
tion
B
Changing part variant x-times axial screw connection bayonet
B1 Fixing screws changing part variant x-times axial screw connec-
tion bayonet
Depending on the version of changing parts, they can be re-
moved as follows.
If necessary, in addition to these operating instruc-
tions, you should also read and follow the operating
instructions for the relevant changing parts.
INFORMATION
To be able to remove the changing part, it may be nec-
essary to remove the clamping element first.
1. As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
