![background image](http://html.mh-extra.com/html/haier/tn201auv/tn201auv_service-manual_138218007.webp)
7
TN201AUV Alignment
The alignment and test processes should be taken under the standard NTSC-M audio
and video conditions, and there should be V-CHIP and CCD contents in the test
signal.
z
If alignment:
1. Test equipments:
a. 45.75MHz sweep generator
b. AC 120V/60Hz power supply (with short and over current proof)
c. Digital multimode
2. Alignment
a. Connect position pen of digital multimode to 47 pin of N101 on main PCB:
b. Connect 45.75MHz sweep generator to test top between W108 and C110:
c. Connect 120V/60Hz power supply to outlet XS502A.
d. Adjust T101 and make digital multimode display 3.6V.
Summary of Contents for TN201AUV
Page 8: ...8 ...