Haier TN201AUV, Service Manual

Page: 14 / 15

14
capacitor
work, no high potential
generate of enlarging the
reverse
and no X-ray exists.
capacity, does not
take
effect on the X-ray.
T471 Line output JF0510-
191129
When T471 does not work, no high potential
generate and no X-ray
amplifier exists.
R471 Cement
RX27-5W-
3.9 Ω -J
The potential on the
collector
No bias level on
V432, no
resistance
anode of V432 is raised
and its
switch signal
outputs from
static working point is
V432, T471 does
not work, no
changed, which make
the potential
high potential
generate
output of T471 rise and
possibly
and no X-ray
exists.
will generate X-ray.
R434 Oxide film
RY17-2W-
3.3K Ω ±
The potential on the
collector
No bias level on
V432, no
resistance 5%
anode of V431 is raised
and the switch signal
outputs from
static working point is
V432, T471 does
not work, no
changed, which make
the potential
high potential
generate
output of T471 rise and
possibly
and no X-ray
exists.
will generate X-ray.
R412 Carbon film RY13-1/6W-
8.2K Ω
When shorted, the
voltage
The feedback
voltage from
resistance ±5%
feedback from the 9th
winding of
the 9th winding of
T471 will
T471 will not get
divided, thus
never PENETRATE
make VD412 more
easier get
VD412, the X-ray
protection
PENETRATED and the X-
ray
circuit will not
production circuit more
easier to
start. There might
be X-ray
start. generated.
VD41 Voltage
H27L1/KEL-
7V5B1
Same as r412 Same as r412
2 stabilizer
diode
VD55 Current EU3A/RU3A
Will not regulate the AC
output
No main voltage
exists, no
1 Regulator
current from the 9th
winding of
X-ray will generate.
Diode T511 and let it go