10
CRB/W Test mode: 0=normal, 1=dark field, 2=bright field
3=cross figure signal
0-3
0
HBLKL Left blanking
0-7
0
HBLKR Right blanking
0-7
0
BSHLD ABL door limit
0-7
3-4
EMABL Emergency ABL remove switch:0=on, 1=off
0-1
0
MDSTP Use brightness to release ABL, 0=off, 1=on
0-1
0
FMLBL FM output accuracy
031
16
BRABL Brightness ABL switch 0=off, 1=on
0-1
1
VDLBL Video demodulation output range 0=small, 1=large 0-7
7
PASSW V-CHIP function 0=OFF, 1=ON
0-1
1
3. Simulation preset
1) Input color bar signal;
2) Press 'MENU' key, set color, contrast, color saturation, tint at medium
position;
3) Press 'DP' key of the alignment remote controller to call out the menu
which contains the following items:
OSD
Description
Range
Reference
Sub brightness Preset brightness
0-127
60
Contrast
Preset contrast
0-27
27
Tint
Preset tint
0-77
35
Color
Preset color saturation
0-27
14
4) When done, press 'PICTURE' to save the result.
III. Adjust the white level:
1) Press 'GEO' of alignment remote controller, set the item 'NO SD POWER OFF
YES' to 'NO', keep the TV power on for over 30 minutes:
2) Degauss the CRT:
3) Input bright field signal through AV channel:
4) Connect white level test equipment to the set:
5) Press 'W/B' key of the alignment remote controller to call out the following
menu:
OSD
Description
Range
Reference
RD
Red stimulate potential
0-127
64
GD
Green stimulate potential
0-15
7
BD
Blue stimulate potential
0-127
64
RB
Red stop potential
0-255
Preset 127,adjust 127
Summary of Contents for TN201AUV
Page 8: ...8 ...