Engligh
4 - EN
Installation
1
1
1
1
3
●
Remove all the packing materials (including the EPE base)to
prevent vibration during use, as shown in the right picture.
Upon opening of the package, water drops may be seen on
the plastic bag and the porthole. This is normal phenomenon
resulting from water test in the factory.
●
Check attachments and materials with reference to the following
Qty
Water
hose
Drainage
holder
Warrantly
card
Plastic
plugs
Operation
manual
Name
Model
HVS1200
HVS1000
●
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration
components inside of the washing machine during the
transportation process.
Before
use:
1.
Remove the back plate;
2.
Remove the three packing bolts on the back plate and
take out the rubber hose;
3.
Replace the back plate;
4.
Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be
kept in a safe place for later use)
Fig. 1
Fig. 2
Fig. 3
●
Adjusting the washing machine
There are adjustable feet under the bottom of the washing
machine. Before use, the washing machine should be
adjusted, as shown in Fig. 3, so that it is level.
